No passwords, no registration, no paywalls, no popups

As an Amazon Associate & eBay Partner we earn from affil links

finishing.com -- The Home Page of the Finishing Industry

Search our quarter-million Q&As

Home of the finishing HOTLINE since 1989

-----

Need Tin-Nickel plating of a shaft

2005

RFQ: I am with a machine shop in Fall River, WI. We have a shaft that we are making for a customer that calls for Tin Nickel Plating. All our current plating vendors have heard of this process but none can do it or know of anyone that can do it. The shaft is 1" diameter by 13.385" long. Can anyone give us a source?

A free & fabulous
1-1/2 hour podcast presentation
courtesy of Lou Morin [deceased]

Thank You

Dan W [surname deleted for privacy by Editor]
machine shop - Fall River, Wisconsin

Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).

--
Ed. note: New Brunswick Plating [a finishing.com supporting advertiser] offers tin-nickel plating.

Sorry! Finishing.com is temporarily Read-Only.
Please maintain your bookmarks! Although Ted Mooney is retiring, finishing.com is not!
It will have a new owner/curator very shortly!

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: