HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 28361

Gold plating large non-conductive substrates

++++

We are in the need of a business that can gold plate non-conductive material - Fiberglass / gelcoat. Currently we are fabricating a 20' tall replica of the World Series trophy and need some rather large parts gold plated. Basically a tank that can hold a 3' x 3' x 12' block to be able to do all the parts in their smallest break-down form. With 26 flag poles ranging from 48" to 120" tall about 10 to 15 individual pieces.

Jeff Spoor
Custom Fabrication - Orlando, FL, USA

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: