No passwords, no registration, no paywalls, no popups

As an Amazon Associate & eBay Partner we earn from affil links

finishing.com -- The Home Page of the Finishing Industry

Search our quarter-million Q&As

Home of the finishing HOTLINE since 1989

-----

SEEKING SILVER AND TIN PLATING

WE NEED 60 pieces. OF A RING-OIL SEAL PART, SILVER PLATE (HEAVY) SURFACE "X" AND DIA "A" PER SPEC. AMS2410 .010-.020 THICK. ALSO TIN PLATE TYPE I .0001-.0003 THICK SPEC. MIL-T-10727 ALTERNATE AMS2400Y DIFUSE AT 800 °F FOR ONE HOUR IN AIR. CO-DEPOSIT LEAD-TIN OVERLAY PER SPEC SAE19 7.0 TO 12.0 % TIN .0009-.0010 THICK. PART SIZE IS 6.245 OD X .581 WALL MATERIAL IS 4140 ASTM A519 ANNEALED

MARIA OLIVEIRA
- PERTH AMBOY, NEW JERSEY, UNITED STATES
2003

Ed. note: This RFQ is outdated, but technical replies are welcome, and readers are encouraged to post their own RFQs. But no public commercial suggestions please ( huh? why?).

Sorry! Finishing.com is temporarily Read-Only.
Please maintain your bookmarks! Although Ted Mooney is retiring, finishing.com is not!
It will have a new owner/curator very shortly!

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: