No passwords, no registration, no paywalls, no popups

As an Amazon Associate & eBay Partner we earn from affil links

finishing.com -- The Home Page of the Finishing Industry

Search our quarter-million Q&As

Home of the finishing HOTLINE since 1989

-----

Need source for regalvanizing anchor chain

I run a large sailboat which is currently in refit, and we have two 420 foot lengths of 5/8 inch stud link anchor chain we need to get hot dip galvanized. The chain is in excellent condition and we would like to keep it that way by renewing the coating. We have been in touch with the galvanizing firms in Miami, Tampa, and Jacksonville, but none of them have a vibrator or hot air blower to clean the chain after dipping, so they don't offer a clean non slag or fused link result.

Can anyone help with the contact information for a plant who professionally galvanizes new chain and would be willing to take this job? There would probably be more work from this because none of the large yachts with expensive anchor rodes I have talked to have a source for re galvanizing their chain, but would very much like to.

Capt. R.B. Cogswell
- West Palm Beach, Florida, USA
2003

Sorry! Finishing.com is temporarily Read-Only.
Please maintain your bookmarks! Although Ted Mooney is retiring, finishing.com is not!
It will have a new owner/curator very shortly!

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: