| Search our quarter-million Q&As |
Home of the finishing HOTLINE since 1989
-----Pursuit of Shiny Parts
I am in the process of starting a business of custom motorcycle parts, and wish to also chrome some of these parts, but before I put all of my cards on the table, I want to know what the initial investment is, i.e. equipment, safety and environmental strategies, and why is everything I've researched in regards to "finished products". Where can I get my own "stuff", and how hard is it to effectively, and productively use it?
Thank you in advance for any, and all correspondences!
- N. Vassalboro, Maine, USA
2003
We have an "Introduction to Chrome Plating" on line here, Jason, that I think will be what you are looking for.
Most businesses do not build their products starting with coal and iron ore; instead they build only a portion of the manufactured item in-house and farm the rest of it out. An example of this is that automobile manufacturers do not generally do in-house plating anymore--they farm it out to plating jobshops.
So the first thing you want to consider is whether there is a compelling reason why you must do the chroming in-house when even GM & Ford don't. Plating was this country's first business sector saddled with categorical environmental regulations, and it is obviously difficult to summarize thirty years of environmental issues here, but if I were the bank I wouldn't loan you $2 on a business plan that involved in-house plating unless you presented a clear and compelling case why it absolutely had to be done in-house 🙂
If you really need to do the plating in-house, spend a few hours with our search engine and you'll find dozens of responses to similar questions to yours; then go on to joining the NASF and hiring a consulting engineer to design the plant for you. There are some businesses--like pharmaceuticals and plating--that you just can't afford to enter without some years of experience or a knowledgable assistant. Good luck!
Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
Need quick confidential answers? $25
Need project assistance? $100/hr.
2003
If you don't have $200,000.00+ a year worth of plating forget about it.
Todd Osmolski- Charlotte, North Carolina, USA
2003
adv.
Sorry! Finishing.com is temporarily Read-Only.
Ted Mooney is retiring but I have several offers to take it over.
We're working hard to make sure we find it the best new home.