Aloha, fun & authoritative answers -- no cost, no passwords, no popups
(as an eBay Partner & Amazon Affiliate we earn from qualifying purchases)

Metal finishing Q&As since 1989

-----

METGUARD WDS-11 Specification

I am a design engineer for a spring manufacturing company in Australia. We have had a enquiry for a finish that we are not familiar with and was wondering if you could provide any information on the following specification. METGUARD WDS-11

Kind Regards,

Luke Vidal
Gibbens Industries - Sydney Australia

That might be one of Hubbard Hall's Metalguard family of Water Displacement Solvent, a rust proofing product. Varies from dry to the touch to a full oil depending on the one selected. James Watts
- Navarre, Florida

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: