comcomThe home page of the finishing industry ®
 [avail.] |
|
|
|
The links above go directly to the book in question when possible. Inventory at book dealers varies; determine if the edition being offered by the dealer is the edition we illustrate/discuss here and the edition you want. If a link doesn't work or doesn't point to the right book, the dealer may not have a copy at this time; try one of the other sources. Disclosure: finishing.com receives a commission if buy a book by following these links.
|
Available for review and on-site research at the Joseph Mazia Memorial Research Library housed at finishing.com in Brick, New Jersey |
Ninth Edition is reviewed and illustrated. 715 oversizes pages. This is one of our "must have" books, and covers at least two subjects to greater depth than other books we are familiar with, namely some of the science of how plating solutions work (for example, what generic chemicals function as nickel plating carriers, primary brighteners and secondary brighteners, and how they work), and cleaning and finishing of metals other than steel and aluminum, such as magnesium nickel alloys, and the refractory metals. This work covers cleaning, mechanical prep, plating of most of the common plateable metals, electropolishing, and treatment of plating waste. Approximately 100 pages are devoted to metallic coating processes other than plating, including galvanizing, aluminizing, hot dip tinning, thermal spray coating, CVD, vacuum coating, sputtering, ion plating and ion implantation. Non-metallic processes covered include phosphating, chromating, painting, enameling, and ceramic coating. This edition is out of print and has been replaced by ASM Metals Handbook, vol. 5, Surface Engineering, but is available from some sources used. |
|
| |
ISBN
Pub. year
Author
Publisher
9993981532
1982 (Ninth Edition)
American Society for Metals
American Society for Metals
