HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 9051

Algae in PAA Tank

I am looking for any information on the removal and control of algae that is in our Phosphoric Acid Anodizing tank. This solution of a 75% Phosphoric Acid at 16 oz / gallon of water is maintained at 77 F. The use of a Ultra Violet system has been mentioned as one possible cure.

Eddie Roach
- Tulsa ,Oklahoma

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

Jobshops Capital Equip. & Install'n Chemicals & Consumables Consult'g, Train'g, Software Environmental Compliance Testing Svcs. & Devices Used & Surplus