HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 8001

Electroless copper(Cu) and electroless nickel(Ni).

Dear Sir/Madam

I hope you are well. At the moment I need your help in regards to electroless copper(Cu) and electroless nickel(Ni). I need a full detailed process to use in industrial level, I am grateful for your support.

Thanks

Arshad Ali
Auto Bike Nippone - Pakistan

Books have been written on the subject of electroless plating of copper and nickel, and we don't have time here to do what you need. But you will get good support from this site if you make your questions specific instead of general. However, there are many suppliers out there who want to sell you electroless copper and/or nickel; why don't you contact them?

James Totter, CEF
- Tallahassee, Florida

CuSo4=15g/l
rochel salt60g/l
NaOH=35g/l
formaldhid=20g/l
NiSO4=0.5g/l

I think I help u in your work.

With my best regardless,

Maher
G.L.S. - Cairo, Egypt

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: