HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 6884

Correlation between pH and removal of Boron by using RO membrane

I'm doing my thesis now. I need information about correlation between pH and Boron removal by using RO membrane. I would appreciate if anyone could help me.

Tan Ming C. [last name deleted for privacy by Editor]
- Skudai,Johor Bahru,Malaysia

----
Ed. note: Readers who wish to answer, please do so. Readers who are looking for answers please see our FAQ on waste water treatments for boron. It lists the more than 20 threads on this topic that are on line here.

January 17, 2008

Hello, I found on the internet some answers. You can change pH to 9 or higher to recive more borate ions. It gives more efficiency on Reverse osmosis membranes.
I hope that was helpful.

Michal Adamik
- Mikolow, Poland

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: