finishing.com logo ips1
HOME FAQs BOOKS JOBS: Help Wanted Suggestions      you are here: Hotline/Forum => Letter 6016

Need masking tape for gold and silver plating

.

Hi, My name is Gary,

I produce a range of goods for several companies including my own, I am interested in developing my products using a masking tape to protect certain areas from plating, both Silver and 24 carat gold plate.

Can you help me find the best masking tape to use.

Gary j [last name deleted for privacy by Editor]
- ENGLAND


March 10, 2011

Hi, Gary.

The tape manufacturers offer a vinyl adhesive tape they call "plater's tape". It's very similar to electricians' black tape except it's a bit heavier (probably so it runs straighter) and it's usually not black; green and red are common colors. 3M, Sequoia, and others offer it to my recollection. Good luck with it.

Regards,

pic of Ted Mooney Teds signature
Ted Mooney, P.E.
finishing.com
Brick, New Jersey


ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

Jobshops Capital Equip. & Install'n Chemicals & Consumables Consult'g, Train'g, Software Environmental Compliance Testing Svcs. & Devices Used & Surplus


Home    -    Contact    -    ©1995-2012 finishing.com     -    Privacy    -    Search