HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => letter 53590

Looking for a small passivating line for stainless steel

November 10, 2009

I'm looking to procure a small passivating line (mainly nitric acid, ASTM A380 [link is to spec at TechStreet], Code F) new or used. Typically doing austenitic steels, small quantity (few per week), largest piece is probably a sq. foot.

Can anyone recommend a vendor. Interested in new or used (but must be a complete system in turn-key condition).

I'm in Toronto.

Martin MacDonald
manufacturing - Toronto, Ontario, Canada
^- Privately contact this inquirer -^

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: