HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 53377

Seeking Blue Xylan Plating

October 16, 2009

We are looking for a new company to do Blue Xylan Plating for the following items:

QTY

600 5/6-11 X 2" HEAVY HEX BOLT, GRADE ASTM A193 [link is to spec at TechStreet] -B7
300 5/8-11 X 3 3/4" HEAVY HEX BOLT, GRADE A193-B7
300 5/8-11 HEAVY HEX NUT, ASTM A194 [link is to spec at TechStreet] -2H

We normally use our regular plater, but are looking for someone to beat their prices. Please respond ASAP if you can help us out....thanks!

Jason Ruble
Distributer - Santa Ana, California
^- Privately contact this inquirer -^

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: