HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 53371

Seeking Brass Dip

October 15, 2009

I am looking for a product such as Brass Dip that was supplied by Paxton Production Supply. They no longer exist and I am now looking for an alternative to what this brass dip did. It coated the brass with a bright yellow pickled finish that would not tarnish after being dipped in the solution for only 10 to 15 seconds. It came in a crystal form and was added to water to make up the solution. After dipping in brass dip the casting was then dipped into Nitric acid for only a couple of seconds to finish the polishing process.
Could anyone please direct me to this product or another that is similar.

Dennis Mashburn
buyer - Abilene, Texas, USA
^- Privately contact this inquirer -^

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: