HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 53181

Request finishing for berylium

September 27, 2009

We would like to know if anybody is working with a material called ALBANET,combination of beryllium and aluminum. We would like to have black anodize and chem film on a machined part of 2.5 X 2.8 X .75 approximate dimensions.
Your help is appreciated.
Respectfully,

Alex Farkas
Machine shop - Colorado Springs, CO, USA
^- Privately contact this inquirer -^

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: