HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 53159

Application of tungsten disulfate dry powder

September 23, 2009

Having received enquiries for the application of tungsten disulfate powder (0.5 micron)I would appreciate any indication on how this is applied to both aluminium and ferrous metals. All that I have been able to establish is that it is an impingement process and assume this is achieved by the use of a pressured air supply in side a booth of some type. Any additional info would be most gratefully received. thanks

Alan Burbidge
plating shop empolyee - Oxfordshire, UK
^- Privately contact this inquirer -^

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: