HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 53124

Need Electrical Resistance Testing Per MIL-DTL-5541 or MIL-DTL-81706

September 17, 2009

I would like to know how electrically conductive the surfaces of my aluminum and zinc parts are when I get them back from chem film coating. I would like to use the method specified in Mil-DTL-5541 [link is to spec at TechStreet] and 81706. Who does this type of testing? I need sources and am willing to make test panels, etc. I am in the southwestern US (PHX).

Dave Laidig
Product Designer - Phoenix, AZ, USA
^- Privately contact this inquirer -^

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: