HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 53009

E-coating parts for classic auto restoration

September 2, 2009

Need a 'job shop' type service that can e-coat classic car parts. Parts range in size from hoods, fenders, doors, and trunk lids...to whole auto bodies (disassembled of course). Prefer a service company that also does the pre-cleaning before e-coating(dip/strip or oven bake-off) to bring parts to bare metal first. Right now I use two separate companies to do the stripping/cleaning and e-coating.

Regards...

Mike Mullin
hobbyist - Hazleton, PA, USA
^- Privately contact this inquirer -^

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: