HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 52984

Need new ceramic finishing equipment for current project

August 28, 2009

I need a high speed system or several individual machines that can automatically cut, grind/polish, pressure wash/force dry and proof test a test tube shaped alumina ceramic product. Product is approximately 1.5 in-sq x 10 in tall, hollow and will be automatically fed and indexed through the above processes. Referrals to companies that are experienced with this would be appreciated.

Carl Gurnett
Automation - Victor, NY, USA
^- Privately contact this inquirer -^

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: