HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 52982

Need Protected Silver Plating for Reflectors

August 28, 2009

We are a renewable energy company in Florida. We need to find someone that can provide protected silver plating for some light reflectors. The reflectors are made of aluminum (9" diameter). The objective is to plate the surface to a mirror finish that can reflect light with at least 95% reflectivity coefficient. The reason, we need the protected silver is that the reflectors need to last about 25 years.

Any ideas?
Dan

Dan Ammar
Customer - Orlando, Florida
^- Privately contact this inquirer -^

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: