HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 51034

Zinc Coating 210 litre / 55 gallon drums

January 23, 2009

I am looking to set up a 220 litre/ 55 gallon drum factory, instead of painting the drums we want to zinc plate them.
Is there anybody doing this, can one seam-weld zinc plated sheet or do we need to make up drum bodies and plate after welding?
How do I go about setting up a Zinc plant as I have no knowledge re equipment and consumeables etc?
Drums destined for the fruit-pulp industry, is zinc coating toxic for foodstuffs ?
Any advise or assistance will be greatly appreciated

Peter Krichel
Drum manufacturer - Johannesburg Gauteng South Africa
^- Privately contact this inquirer -^

January 23, 2009

Hi, Peter. Zinc is not a food-safe metal. Sorry, but this idea is not a promising one.

Regards,

Ted Mooney, P.E.
finishing.com
Brick, New Jersey

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: