HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 50095

Electrodeburring on SCM-440 Martensite

September 25, 2008

We're developing a fully CNC cog, and the material is SCM-440 with Martensite treatment.

Due to its complex geometry, CNC burrs are thick, tough and cannot be eliminated via tumbling or sandblasting. Especially, the tolerance is 30 microns max.

We are now considering electrodeburring or TEM.

I wanna know if it's possible to carry out electrodeburring process on SCM-440 to remove burrs without changing dimension significantly?

Please let me know if more information is required.

Many thanks!

Cliff Chang
designer - Taichung, Taiwan
^- Privately contact this inquirer -^

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: