HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 50065

Painting of 316 SS after passivation

September 16, 2008

I need your help please. Before I even start with painting, I would like to know if I will have any problems applying a P3 coating system onto 316 SS, after pickling and passivation? Does the chemicals have any effect on the coating system?

Pieter van Heerden
quality engineer - Al Jubail, Saudi Arabia
^- Privately contact this inquirer -^

September 30, 2008

Should not be a problem.

Lee Kremer
Stellar Solutions, Inc.

McHenry, Illinois

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: