HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 49069

Need a vapor degreasing service

June 19, 2008

Our vapor degreaser closed his doors and we are looking for a new company to vapor degrease our parts.
Most parts are .010 thick nickel or stainless steel covers.
1/2 square to almost 3 inches square.
Lot sizes run from a couple hundred to thousands.
We'd like a place near us for ease of transport of parts.
We're located in Northern New Jersey.

Thanks!

Mark Spaziano
Metal stampings - Clifton, New Jersey

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: