HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 49003

I need to build a electro polishing wand for 304 stainless

June 10, 2008

If anybody has any directions or plans it would be greatly appreciated.

Travis Armstrong
product designer - Florence, AZ, USA

June 11, 2008

Hi, Travis. You might start by reviewing Rubinstein's Electrochemical Metallizing.

Regards,

Ted Mooney, P.E.
finishing.com
Brick, New Jersey

June 12, 2008

I would talk to at least two of the vendors that advertise at this site about wands, power supplies and solutions unless you have a lot of experience doing it.

James Watts
- Navarre, Florida

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: