HOME FAQs BOOKS JOBS: Help Wanted Suggestions      you are here: Hotline/Forum => Letter 46074

---

We need conductive finish on polyester resin for copper electroplating

+++++++

We want to electroplate artistic pieces (polyester resin) in silver and gold.But only have doing it with initial coating in silver but it's too expensive.
Is there another way to turn polyester to electric conductive for electroplating?

Thanks in advance.

Rafael Ayala
student - Mexico City, Mexico

---

+++++++

Hi, Rafael. Yes there are alternatives for metallizing polyester. Please start with our FAQ on this subject, then ask whatever questions you may have. Thanks.

Ted Mooney, P.E. finishing.com Brick, New Jersey

---

July 11, 2009

Hi, I'm also trying the gold electroplating on polyester resin with sandblasting effect. I am doing copper plating followed by sandblasting process during sandblasting the copper layer coming out. How can I get gold electroplating on polyester resin?

saravana babu
- India

---

July 30, 2009

Hi, Saravana. Please spend some more time explaining your situation. It sounds like you are copper plating the item, then sandblasting the copper right back off again and wondering why it's gone?

I don't think that's what you are trying to say, but I can't figure it out.

Regards,

Ted Mooney, P.E. finishing.com Brick, New Jersey