HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 46063

Looking for a PCB fabrication house who can do 2 different plating on one board

+++++++

I have a PCB which has 2 different plating specs.

let's say one half (not really half, but a small area) of the board has gold finger pads on the edge which needs to be "minimum 30 micro inches of immersion gold over 150 micro inches of electroless nickel (AuNi) over copper"

And the other half of the board needs to be, "a maximum of 4 micro inches of gold"

My manufacturing facility is in Suzhou, China so a local source would be preferred if not border/surrounding countries would do as well...

Please let me know if you can do this or if you know a compnay who can.

thank you,

Atul Sharma
PCB designer - Dallas, Texas

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: