HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 46025

Commercial grade zinc-plated rivets on car wheels are rusting

+++++++

We are an aluminum wheel manufacturer. Recently we applied zinc plated rivets on painted aluminum wheels, and rivets became rusty in a few months being in the field. Is it a defective plating or is it expected to fail that fast?

Vadim Gorokhovsky
engineer - Chino, California

+++++++

Zinc plating is usually not considered suitable for outdoor exposure. Rivets, because the substrate metal and the zinc plating on them must be stretched and distorted to form the head, is even less satisfactory.

Ted Mooney, P.E.
finishing.com
Brick, New Jersey

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: