We melt zinc dross to form secondary zinc ingots. sometimes the quantity of aluminium is very high in zinc dross which is not good for our consumers. is there any chemical that can be used to separate aluminium from zinc during melting.
Sumit Singla
Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.
If you are seeking a product or service related to metal finishing, please check these Directories:
Jobshops
Capital Equip. & Install'n
Chemicals & Consumables
Consult'g, Train'g, Software
Environmental Compliance
Testing Svcs. & Devices
Used & Surplus
Home - Contact - ©1995-2012 finishing.com - Privacy - Search