HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 46011

Need nickel plating with Teflon

+++++++

I have acustomer that has run into a problem with rubber stiking to the outside of a LCS Tube that is 4.00" in diameter by 24" in length. They have asked us to see if we can locate someone that can nickel plate with a co-deposit of teflon.

Jeffrey L Lenhart
Centerless Grinding - North Royalton, Ohio, USA

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: