HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 44091

Chem film needed for Ti /6AL-4V

+++++++

I have a titanium part that needs to be chem filmed that is 2.900x1.675x1.000. All our vendors are aluminum only. The quantity will be 3000+ pieces in 2 lots. We will require certs to appropriate mil-specs with the production. Please provide a quote.

There is also a requirement for painting, clean and pickle also, but we have that covered. We of course would rather do it all in 1 place but the chem film is our issue. So we can discuss the other requirements if you can help us.

Thank you,

O'Brien O'Connell
Aerospace - Torrance, Cal., USA

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: