finishing.com logo ips1
HOME FAQs BOOKS JOBS: Help Wanted Suggestions      you are here: Hotline/Forum => Letter 43061

Advantages of PVD Coating over Electroplating

++++++

Hello ,
I want to know what are the advantages of coating tools by Plasma Vacuum Deposition process over coating by Electroplating.

K.Murthy
student - Hyderabad, Andhra Pradesh, India


++++++

Hi, Murthy. Some materials can be applied by PVD but not by electroplating, including some very hard and wear resistant coatings. Plus there is usually a reduced potential for release of a toxic material to the environment from PVD compared to electroplating. You did not ask for the disadvantages of PVD compared to electroplating, and your teacher may grade your homework poorly if you leave it at that :-) Good luck.

pic of Ted Mooney Teds signature
Ted Mooney, P.E.
finishing.com
Brick, New Jersey


January 7, 2011

Watch makers are increasingly using PVD on watch cases and movements. While we might presume that it creates a more durable finish, interested to know if it's nothing more than marketing puff.

Dave Carter
- Boston, Massachusetts, USA

January 7, 2011

Hi, Dave

Watchcases are very small high production items that happen to play well to the advantages of being applied by PVD. From the consumer's standpoint it may be of little importance how a coating was applied, but if a particular coating is ideal for an application, and that coating can only be applied by PVD, that would dictate the use of PVD.

Here is an example: gold is a beautiful precious metal that has long been electroplated onto watches, but it is often applied very thin because of its cost, and then it can wear away, especially off of exposed high points as shown:

worngold

Titanium nitride, the goldish-color hard coating you see on drill bits, is applied by PVD. If the watch maker had applied titanium nitride followed by gold electroplating, those exposed high points would have remained quite goldish looking even after the gold has worn off, instead of the unacceptable contrast of turning nickel colored as shown.

Regards,

pic of Ted Mooney Teds signature
Ted Mooney, P.E.
finishing.com
Brick, New Jersey


ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories:

Jobshops Capital Equip. & Install'n Chemicals & Consumables Consult'g, Train'g, Software Environmental Compliance Testing Svcs. & Devices Used & Surplus


Home    -    Contact    -    ©1995-2012 finishing.com     -    Privacy    -    Search