HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 42026

Seeking tin coat process for aluminium pistons

++++++

We're a aluminium pistons manufacturer located in Venezuela, we need alternative suppliers; looking in USA, South America or Europe. We usually use Alstan powder tin and Alstan liquid tin, we mixed both and we use to make a tin coat, we need a supplier that apply the same process, we require MSDS, data sheet to compare and make some test to our process, we usually use 300 lbs powder tin 7,5 gal liquid tin monthly, in next year we're gonna increase production over 80000 pcs more and we're thinking to make tin coat 100% production.

Omar Rosales
Aluminium Pistons Manufacturer - Valencia, Carabobo, Venezuela

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: