HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 42025

Need baths, anodes, chemicals for Tin plating on Copper

++++++

We are electrical switchgear manufacturer.
Five years back my company hired expert to arrange copper tin plating process.
As per the plan the equipment were ordered but the gentleman left the country leaving thr things incomplete.

Would you please guide us if we can set up this facility.

We have
1. Rectifier.
2. Filtration system.

Order for the following was yet to made

1. Baths
2. Anodes
3. Chemicals.

Can you please guide us how to make this facility operative.

Thanks & Regards,

Ahmad Chughtai
switchgear - Sharjah, United Arab Emirates

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: