HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 4055

Passivation of 420 Stainless Steel

Can nitric-acid passivation process make 420 Stainless steel as corrosion resistant as 316? Please comment. Many thanks.

Kwok-wai CHOOK
- Hong Kong, China

Yes, and it can make silk purses out of sow's ears.

-- The Society for the Preservation of Barnyard Metaphors

No, Mr. Chook, it won't work. 316 is a very high grade of chemically resistant stainless steel. Passivation of 420 will help deter flash rusting, but it won't turn 420 into 316.

Ted Mooney, P.E.
finishing.com
Brick, New Jersey

I was a surgical instrument repair/maker for over 20 years.The industry used 410 and 420 series for cutting tools due it's ability to hold an edge, and 316 series to make rods and screws for putting people back together. Just pull out a chart showing the difference in composition of both and the reason is quite apparent.

Best wishes,

al mullins
- Fayetteville, Georgia

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: