HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 39052

Tantalum polishing

++++++

We are a watch making company from Hong Kong. We intend to use tantalum as the material for the watch case. Can anybody tell us whether it is possible to:
1. polsih the case like what we are dong on Stainless Steel 316L-
2. making screw back-
3. fine cut/polish some of the measurement to 0.1 mm-

Ashley K C Lung
- Hong Kong, PRC

++++++

yes, yes, yes. To all of your questions. We have developed tantalum polishing technology, well controlable, safe for workers and environment. Contact us if interested

Anna Berkovich
Russamer Lab

Pittsburgh, Pennsylvania

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: