HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 38066

Quantitative analysis for oil content on oiled Galvanized sheet

+++++

Good morning,
We are usually doing oiling through electrostatic oiler for galvanized coil for protecting surface against white rust. as we know oil thickness is very thin , but we need to know exactly how much oil thickness or oil coating /mtr2 on sheet surface.
Also can you please give specification of oil coating on sheet.

With Regards

SURENDRA KUMAR PANDA
SISCO(HADEED) - SAUDI ARABIA

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: