HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 36090

FED-STD No 595

+++++

I see the problem with link between RAL and FED standards is all over the word. We are having identical problem. Tools required painting using Fed standards which my distributors not familiar.
Some colors have not direct crooss overs. This can be solve out: if you have catalog with color sample of FED-STD 595 then every distributor could mix for you proper color.

But I have not idea if ther any link or web site which provide such information.
I need FED-STD No 595 paint 16476 GREY GLOSS.

Waldek Swierk
Rzeszow - Poland

First of two simultaneous responses -- +++++

Hello Waldek,

Tell whomever is painting your tools to get their free catalog located here: http://assist2.daps.dla.mil/eAccess/warehouse.cfm

Jake Koch
G. J. Nikolas & Co., Inc.

Bellwood, Illinois

Second of two simultaneous responses -- +++++

Waldek, Fed-Std-595 is not available online.

See letter 34265 for my earlier explanation.

Best of luck!

Lee Gearhart
metallurgist
East Aurora, New York

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: