HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 36087

Coating of aluminum surface with graphite

+++++

I have a number of 2" * 2" * 0.125" aluminum samples that need to be coated with a uniform layer of graphite of thickness 10 microns. The samples are going to be placed under water for up to an hour at a time,so the coating should be water resistant.Are there any shops that can do this kind of a job?

Harshavardhan R Pakhal
Graduate Student - West Lafayette, IN, USA

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: