HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 36054

WE ARE LOOKING FOR A ZINC ELECTROPLATING (ON BRASS WIRE) PLANT

+++++

We are a leading manufacturer of coated and uncoated EDM wires in INDIA; We are looking for a zinc electroplating plant. We intend to electroplate brass wire with zinc. The size of wire is 1.20mm to 1.60mm. We like to plate at a speed 100meter/minute. Who can supply a machine to suit our purpose?

SUGATA CHAKRABARTTY
EDM WIRE MANUFACTURER - UTTARPARA,WEST BENGAL, INDIA

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: