HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 31086

Need someone to print my graphic on an old brass clockface

++++

I have a clock face, it is thin brass (plated?) about 7" diameter. It had some graphics printed (a circle, minute divisions and the manufactures name). Then it was covered with shellack. The shellac is failing now and taking the ink with it. I can remove all of the shellac easily but this will take the ink with it.

I can recreate the graphics using a scanner and photoshop - I need someone who can re-print this on the face. Obviously accurate placement is important and I've only got one.

Frank Flynn
Hobbyist - Printing on Metal - Palo Alto, California

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: