HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 3064

GMP Standards

Are there any printed "Good Manufacturing Practice" guidlines for the Chromate plating operation, if so how can I get a copy. Also is acceptable to chromate steel and aluminum on the same process line. Finally I have a supplier who does not air agitate his tanks. What might be some of the problems from not doing this. Thanks for your help.

Morris Bellows
- San Diego, California

I am not sure what you mean by "Chromate plating" operation, Do you mean chromium plating?

You might be able to chrome plate steel and aluminum on the same process line, if you have enough tanks.

A supplier who does not air agitate his tanks may have no problems related to agitation. What did you observe which made you ask the question?

Sincerely,

Tom Pullizzi
Falls Township, Pennsylvania

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: