HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 30047

Going into pickling, passivation, electropolishing of SS business?

++++

I am thinking about going into business in the pickling & passivation of stainless steel and possibly electropolishing small stainless steel components that do not require a large overhead crane or large baths. Treatment of effluent is expensive so I would like to explore all avenues and appreciate any advice on cost saving measures with regard to setting up and conducting new business in the UK.

Many Thanks,

Mike O [last name deleted for privacy by Editor]
enthusiast - Bracknell, Berkshire, UK

December , 2006

That's a pretty broad inquiry for an internet posting, Mike, since each of the three subjects fill several books. But to answer briefly, there are more environmentally benign passivation solutions these days, based on citric acid rather than nitric acid; and there are electropolishing solutions that do not involve strong acids. If you search our Chemical directory you will find suppliers for both. Good luck.

Ted Mooney, P.E.
finishing.com
Brick, New Jersey

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: