HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 30041

Planning to install a galvanizing plant

++++

We want to install a 100 tonne per month galvanizing plant for angle iron and pipes to be used as supports for towers. Envisaged sizes ranges from ISA2525 to ISA 8050 axd pipes from 1" to 3" diameter. Maximum length 20 feet.

Would appreciate receiving catalogues, details of machinery, process of manufacture and estimated cost of such a plant.

Thanks,

Steve Aje
Engineering and Construction - Port Harcourt, Delta, Nigeria

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: