HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 29087

Electroplating Semiconductors

++++

Hi,

I am studying for my Phd and am investigating ways of plating semiconductors. As these are highly non-conducting I was wondering if anyone has a suggestion of how to plate with an electroplating process. Some colleagues plate Pd on semiconductors by electroless methods but I want to try to find out more about preparations or techniques for a normal electroplating procedure. Basically I want to know if theres anything I can do to encourage these type of materials to plate more easily.

Regards,

Liam Lewis
Student - Cork, Ireland

++++

Germanium plating formula:
2o gm GeS2
4o gm KOH
12 gm Na2S
1 lit water,3o C/2,5A per dm2 (According to Fink)

Good luck!

Goran Budija
- Zagreb, Croatia

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: