HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 29077

Tin oxide coating for glass tubes

++++

1. We look for service for tin oxide coating for inner surfaces of glass tubes of OD10mm, ID 8mm and 100mm long.

Dick Morgan
scientific instrument manufacturer - Cambridge, UK

Dear Reader: Sorry, but there is no provision for public reply to this particular letter because it appears to be a commercial inquiry rather than a technical question. Our supporting advertisers should reply privately.

I want to see a list of current letters where public replies are welcomed.

Post a question on a different subject.

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: