HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 28094

Masking for sandblasting

++++

I have a sand blaster and want to start etching glass, and metal. I am looking for a masking that you burn with a neg. in a printer that burns the image on the mask. Then you put the mask on the metal and blast. It's some kind of photo film and it is red. I need help finding it. After you burn it you have to develop it like a pic. Please contact me .

Brett mounts
Sandblasting, etching - Sidney, Ohio

Dear Reader: there is no provision for public reply to this particular letter because it is not a technical question but a commercial inquiry to which our advertisers will reply in private --

Post a question on a different subject.

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: