HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 28020

Problems in zinc plating

++++

Dear Sir/s,

I am presently running a Zinc Plating Plant of small capacity to do Plating job on automobile components,engineering goods etc.we are continuously facing problems in our plant. We are using the electroplating procedure for zinc plating. Sir I want to know about the following: 1.precautions to be taken while doing zinc plating 2.what testing methods should I follow to check whether I need to change the chemicals in the tank. 3.measures to be taken for proper and effective plating. hoping to hear from you soon again and please let me know if you need any further details.

Thanking you yours faithfully,

Hemant More
plating shop - Alwar, Rajasthan, India

++++

Mr. More, you need several books about zinc plating, or a prolonged visit from a consultant. Sorry, but there is no realistic way anyone could tutor you on such a broad subject in a few paragraphs here. We will be happy to try to answer specific questions, but your needs are too broad for an internet forum -- request a visit from your supplier.

Ted Mooney, P.E.
finishing.com
Brick, New Jersey

++++

Mr More,

You need to buy a book on plating. This and a good Plating supervisor with experience will provide all the answers needed.

Regards,

Asif Nurie
Atlanta Global

New Delhi, India

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: