HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 28006

Alodine coating / Aluminum Coils

++++

I am looking for a company that can do do chromate conversion on aluminum coils, Alloy 3105-H26 or 1100-H18. Thickness could be from .005" to .008". Width of the coil would be 49.00" wide. Prefer hexavalent, but trivalent is acceptable as well. This requirement would consist of approx. 10,000 to 15,000 lbs per month of aluminum to be chromated. Any help or any questions, it's much appreciated.

Thanks,

Andrew Trodden
Aluminum Distribution - Union, NJ

----
Readers: This site is made available for camaraderie & technical info exchange by our supporting advertisers, and they will contact the inquirer privately regarding their commercial needs. Please offer comments on any technical issues, but not sourcing suggestions or testimonials. Thanks!

ANSWER or FOLLOW UP POST an unrelated QUESTION HOT Topics

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: