HOME FAQs BOOKS JOBS: Help Wanted Suggestions you are here: Hotline/Forum => Letter 27093

Need copper finish repair on new wall fountain

++++

I have a large copper wall fountain that was damaged in shipment. We may need to repair it. It is dented and the patina finish and clear coat is peeled away. The size of the dent and blemish is about 2 inch square and very shiny compared to the rest of the finish. We would sincerely appreciate if you could recommend a business that could repair the dent and refinish the blemish to match the original. The wall fountain is 5'x 3' and would need to be sent back to California for replacement. Repair seems like a better option.

Thank you.

Neal Grobman
Consumer - Marlton, New Jersey, USA

Dear Reader: there is no provision for public reply to this particular letter because it appears to be a commercial inquiry rather than a technical question. Our supporting advertisers should reply privately.

Post a new question on a different subject.

Disclaimer: It is not possible to diagnose a finishing problem or the hazards of an operation via these pages. All information
presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The
internet is largely anonymous; some names may be fictitious and some recommendations may be deliberately harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: